Hirschmann PowerMICE User Manual

Network Load Control
UM Basic Configuration L3P
Release 7.1 12/2011
8.2 Multicast Application
161
Note: If the device is incorporated into a HIPER-Ring, you can use the
following settings to quickly reconfigure the network for data packets
with registered Multicast destination addresses after the ring is
switched:
 Switch on the IGMP Snooping on the ring ports and globally, and
 activate “IGMP Forward All” per port on the ring ports.
Figure 34: IGMP Snooping dialog

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English