Setting up the Configuration
Environment
UM Basic Configuration L3P
Release
7.1
12/2011
A.1
Setting up a DHCP/BOOTP Serv-
er
273
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the
service responds to DHCP queries.
Open the window for the program settings in the menu bar:
Options:Preferences and select the DHCP tab page.
Enter the settings shown in the illustration and click OK.
Figure 65: DHCP setting
To enter the configuration profiles, select Options:Configuration
Profiles in the menu bar.
Enter the name of the new configuration profile and click Add.
To Next Page
Loading...
Need help?
General
