Hirschmann PowerMICE User Manual

Setting up the Configuration
Environment
274
A.1 Setting up a DHCP/BOOTP Serv-
er
UM Basic Configuration L3P
Release 7.1 12/2011
Figure 66: Adding configuration profiles
 Enter the network mask and click Accept.
Figure 67: Network mask in the configuration profile
 Select the Boot tab page.
 Enter the IP address of your tftp server.
 Enter the path and the file name for the configuration file.
 Click Apply and then OK.

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English