Hirschmann PowerMICE User Manual

Setting up the Configuration
Environment
276
A.1 Setting up a DHCP/BOOTP Serv-
er
UM Basic Configuration L3P
Release 7.1 12/2011
Figure 70: Static address input
 Click New.
Figure 71: Adding static addresses
 Enter the MAC address of the device.
 Enter the IP address of the device.
 Select the configuration profile of the device.
 Click Apply and then OK.

Hirschmann PowerMICE Specifications

General

Brand	Hirschmann
Model	PowerMICE
Category	Network Router
Language	English