Description of the System
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 11/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
2.1.3 Description of the System Components
The qSCALE i2 system is comprised of various components. The typical relative locations of these
components are shown in the photo below.
2.1.3.1 Console (qSCALE i2)
The graphic display console houses the CPU and also displays pertinent information
regarding the RCL configuration. Refer to the Operator’s Manual for detailed opera-
tion of the console.
cSCALE Ix consoles are available in 4.3” (I2) and 7” (I3) sizes. The graphic display console displays
pertinent information regarding the RCL configuration. Refer to the Operator’s Manual for detailed oper-
ation of the console.
2.1.3.2 cSCALE DIO
The DIO module is an I/O module for the decentralized detection of analog and digital
sensor signals as well as for driving actuators and proportional valves. The DIO mod-
ule is able to communicate with programmable logic controllers using the CANOpen
protocol.
To Next Page
Loading...