Troubleshooting
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 33/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
3.2.3 Simple Corrective Actions
NOTE
Not all codes produced by the iSCALE system are “ERRORS”. Some codes generated are simp-
ly for the event log. Others indicate load chart, limits exceeded, and safety warnings. See Sec-
tion 6.2 for more detail on errors.
Error Codes are displayed in order of priority – most critical codes first. Therefore, multiple
codes are possible depending upon the situation.
To Next Page
Loading...