© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 5/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
Introduction
This manual is a component of the equipment or systems supplied by Hirschmann Automation and
Control GmbH. Keep this manual in a safe place and ensure that it is available to all users.
The contents of this manual are subject to change. Hirschmann Automation and Control GmbH do not
provide any guarantee for this material, including the associated guarantee regarding marketability and
suitability for certain intended purposes. Hirschmann Automation and Control GmbH accept no liability
for errors in the contents of the manual or for direct or indirect damage in connection with the provision
and use of the manual.
This manual is protected by copyright. All rights reserved. The manual may not be duplicated, repro-
duced or translated into another language, either wholly or partly, without the prior written permission of
Hirschmann Automation and Control GmbH.
The rendition of common names, trade names, trademarks etc. in this documentation should not be
construed to mean that such names, even without special identification, are free in the sense of trade-
mark and trademark protection legislation and hence usable by anyone.
This device / system are intended exclusively for the tasks described in this manual. Any other use shall
be construed as being inappropriate. The manufacturer accepts no liability for damage caused by inap-
propriate or impermissible use. This device / system may only be used if it is in perfect technical condi-
tion.
Only appropriately qualified personnel may work with this device / system, i.e. persons:
who are familiar with the operation or installation and commissioning
who know the current regulations for the prevention of accidents
To Next Page
Loading...
Need help?
General