Hirschmann qSCALE i2 - Page 24

Troubleshooting
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 24/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
3.1.2.2.2 CAN Sensor Information
This menu shows the status of the CAN sensors. This is the place to start if a problem with a sensor is
suspected.




MAIN
WORKING
SCREEN
OP-MODE
CONFIRM
INFORMATION
SELECTION
EXTENDED
INFORMATION
CAN
INFO
Initializes Selected Sensor
Additional CAN Information
(See Section 3.1.2.2.3)
Stops Selected Sensor
PDO Raw Data Information
(See Section 3.1.2.2.4)
Sets Status to “Pre-
Operational”
CAN Bus is Restarted
(List is Updated)
Sets the Node ID to 127
Icon
Status
Icon Shows Type of Sensor
Sensor Pre-Operational
Sensor Operational
Appears When
Node ID Differs
from Configuration
Sensor Stopped
Sensor Not Connected
Function Keys
Symbols
Status
Icon
Node
ID