Hirschmann qSCALE i2 - Page 26

Troubleshooting
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 26/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
3.1.2.2.4 PDO Raw Data Transmission
To view additional information about a specific CAN sensor press the Extended CAN Information Func-
tion Button.





MAIN
WORKING
SCREEN
OP-MODE
CONFIRM
INFORMATIO
N SELECTION
EXTENDED
INFORMATION
CAN
INFO
PDO
The following information can be found on this screen:
 Value Current Value of the Input (% =
𝑟𝑎𝑤𝑉𝑎𝑙𝑢𝑒−𝑠𝑐𝑎𝑙𝑒𝑆𝑡𝑎𝑟𝑡
𝑠𝑐𝑎𝑙𝑒𝐸𝑛𝑑−𝑠𝑐𝑎𝑙𝑒𝑆𝑡𝑎𝑟𝑡
)
 Fault Indication whether an error has occurred
 State Current Status of value
 Scale Start
 Scale End
 PDO Data Raw CAN Value Read from the Sensor