Hirschmann qSCALE i2 - Page 72

Commissioning
© 2016 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.beldensolutions.com 72/161
qSCALE i2 Cranes (Tool Version 3.0.34) Service Manual / Issue B / 11-2017 / ac.
3. Fully extend the outriggers
4. Retract the outriggers ~1”
5. Press the function but-
ton to set the scale end.
6. Fully extend the outriggers for
operation.
NOTE
This has to be performed for all analog outriggers, if equipped