EasyManua.ls Logo

Hisun HS800 - Engine Lubrication

Hisun HS800
263 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
8-16
• Rapid on-off squeal—Compression leak around cylinder head gasket or spark
plug(s).
• Valve train noise—Check for the following:
1. Excessive valve clearance.
2. Worn or damaged camshaft.
3. Damaged camshaft.
4. Worn or damaged valve train components.
5. The valve hose hole is damaged
6. The valve sticks on the hose
7. Broken valve spring.
8. Low oil pressure.
9. Clogged cylinder oil hole or oil passage.
ENGLNE LUBRICATION
Mis-operation of the engine lubrication system will cause the severe engine failure.
Check the lubrication oil level and pressure of the enginefrequently.
High Oil Consumption or Excessive Oil Consumption
Exhaust Smoke
1. Worn valve guides.
2. Worn valve guide seals.
3. Worn or damaged piston rings.
4. Incorrect piston ring installation.
Low Oil Pressure
1. Low oil level.
2. Worn or damaged oil pump.
3. Clogged oil strainer screen.
4. Clogged oil filter.
5. Internal oil leakage.
6. Oil relief valve stuck open.
7. Incorrect type of engine oil.
High Oil Pressure
1. The lubrication oil pressure valve is stuck and closed.
2. Clogged oil filter.
3. Clogged oil gallery or metering orifices.

Table of Contents

Hisun HS800 - Engine Lubrication