Hisun HS800 - Page 85

Periodic Maintenance
3-20
Adjusting the Headlight
Turn the adjuster (1) in or out to achieve
the desired height of the beam.
Changing the bulb
Remove the headlight holder rubber boot
(1).
Then the headlight holder (1).
Remove the bulb from the headlight holder
By unhooking the tabs.
Install the new bulb
Install the new bulb into the bulb holder
Note:
Avoid touching the glass part of the
new bulb. The oils from your skin will
cause the transparency of the glass to
haze, causing a shorter life expectancy
of the bulb.
Install the bulb holder and rubber boot.
Changing a Tail/Brake light bulb
Remove the bulb holder w/ bulb (1) by
turning it counterclockwise.
Remove the bulb from the holder.
Install a new bulb into the holder and
install the holder into the taillight assembly.