11
1.6 Other Functions
1. Network Function
The projector can automatically send an alert message to the speci¿ed e-mail
addresses when the projector detects a certain condition reTuiring maintenance
or detected an error.
88)
1.6.1 E-mail Alerts
The SNMP Simple Network Management Protocol) enables to manage the
projector information, which is a failure or warning status, from the computer on
the network. The SNMP management software will be reTuired on the computer
to use this function.
91)
1.6.2 Projector Management using SNMP
The scheduling function enables to setup scheduled eYents including
power on / power off. It enables to be “self-management” projector.
The schedule can be set in Projector Web Control or OPTION-SCHEDU/E menu
in the projector.
93)
1.6.3 Event Scheduling
You can con¿gure and control the projector Yia the network using RS-232C
commands.
97)
1.6.4 Command Control via the Network
To Next Page
Loading...
