41
3.1.3 Network Settings
Con¿ gures the settings common to wireless and wired /AN.
3. Web Control
3.1 Projector Web Control (continued)
3.1.3.1 Common Setup
When changing the settings, click the [Network Restart] button after clicking the
[Apply] button to reÀ ect the settings of the projector.
If you connect the projector to an existing network, consult a network
administrator before setting serYer addresses.
The projector does not allow both wireless and wired /AN to be connected to
the same network. Do not set the same network address for both wireless and
wired /AN.
NOTE
continued on next page)
To Next Page
Loading...
