25
2. Connection to the network
Item Description
NETWORK
SETUP
/
WIRELESS
SETUP
(continued)
SSID SCAN
LIST
(continued)
㻔㻟㻕㻌
The OSD below is displayed while the connection
is in progress.
The keys other than RESET button are not
aYailable while the connection is in progress.
The connection process is interrupted when
pressing the RESET button.
The OSD below is displayed when the connection
process is complete.
㻌䠖 㻌
Connection
succeeded
The message below is displayed when the
connection is not established correctly.
䠖
Connection failed
㻌䠖 㻌
Encryption /ock
enabled
㻔㻠㻕㻌
The icon indicating the connection status
) is displayed in SSID SCAN /IST when the
connection is complete.
continued on next page)
･Encryption settings cannot be
changed when encryption lock is enabled
in Network Settings – Wireless Setup in
Projector Web Control. Refer to Encryption
/ock.
43)
Open System Authentication is used for WEP
encryption, and Shared Key Authentication
is not supported. The authentication with an
access point is succeeded and it is regarded
that the connection is established normally
eYen when entering illegal encryption key
due to Open System Authentication,but data
cannot actually be transmitted.
NOTE
To Next Page
Loading...
