30
Item Description
NETWORK
SETUP
/
PROJECTOR
NAME
Any name can be set to the projector to identify it on the
network.
1) Select the PROJECTOR
NAME and press the Ź
button. The PROJECTOR
NAME dialog will be
displayed.
Use displayed software keyboard to enter PROJECTOR
NAME.
2) The current PROJECTOR NAME will be displayed on the
¿rst 3 lines.
Use the ENTER or
button to select and enter
characters.
To erase 1 character at one time, press the RESET button
or press the Ż and
button at the same time. Also if
you moYe the cursor to DE/ETE or C/EAR A// on screen
and press the ENTER or
button, 1 character or all
characters will be erased. Up to 64 characters can be
input for the PROJECTOR NAME.
3) To change an already
inserted character, moYe
the cursor to one of the ¿rst
3 lines, and moYe the cursor
on the character to be
changed. After pressing the
ENTER or
button, the
character is selected. Then,
follow the same procedure
as described at the item 2)
aboYe.
4) To ¿nish entering text, moYe
the cursor to the OK on
screen and press the Ź,
ENTER or
button.
To reYert to the preYious PROJECTOR NAME without
saYing changes, moYe the cursor to the CANCE/ on
screen and press the Ż, ENTER or
button.
continued on next page)
2. Connection to the network
To Next Page
Loading...
