Hitachi CP-EX3051WN - Page 50

50
3.1 Projector Web Control - Mail Settings (continued)
3. Web Control
Item Description
Server Address *1
Con¿gures the SMTP serYer address or the POP
serYer address.
This item can be set not only by IP address but also by
domain name.
Port Number
Con¿gures the port number of the SMTP serYer
or the POP serYer.
*1 The text length can be up to 255 alphanumeric characters, -, and ..
 You can con¿rm whether the mail settings work correctly by using the
[Send Test Mail] button. Enable Send Mail setting before clicking the [Send
Test Mail].
 If you connect the projector to an existing network, consult a network
administrator before setting serYer addresses.
 To use a domain name to the address of the SMTP serYer or POP serYer,
setting the DNS serYer is necessary.
 The characters used for mail address may not be allowed depending on mail
serYer.
NOTE
1. SMTP / POP Server
2. Mail Address
Item Description
Sender E-mail Address
*1
Con¿gures the sender e-mail address.
Recipient E-mail
Address *1
Con¿gures the e-mail address of up to ¿Ye recipients.
You can also specify the [to] or [cc] for each address.
*1 The text length can be up to 255 alphanumeric characters, -, ., “B” and “#”.