68
In any of the following cases, Crestron e-Control
®
cannot be used.
- Network Settings - Other Setup - Crestron e-Control is Disable
47)
- Network Settings - Common Setup - Crestron is OFF
42)
- NETWORK menu - E;TERNA/ CONTRO/ - CRESTRON is OFF
32)
Set Crestron to on and enable Crestron e-Control
®
, then close the web browser.
Next, restart the web browser, followed by entering the projector's IP address.
Only English is supported on Crestron e-Control
®
.
If the connection is terminated, the /oading... screen will appear. Check the
connection between the projector and the computer, then return or refresh the
Web page.
The control from Crestron e-Control
®
is supported only Yia wired /AN.
NOTE
3.2 Crestron e-Control
®
(continued)
3. Web Control
To Next Page
Loading...
