94
8. Other Functions
The procedure to set the schedule in Projector Web Control is described in the
following.
Setting the program is necessary to use the schedule function. 9arious eYents
such as power on/off or switching input source, and the time to execute the eYents
are to be registered in the program. No eYents are registered in program 1 – 16
with factory default settings. Set the program following the steps below.
In the case that the program has already been set, skip to step 6).
1) Select [Schedule Settings] on main menu in Projector Web Control.
2) Click the [Program Edit] button to display
the program edit screen. Select the program
you want to edit in dropdown list and click the
[Select] button.
To Next Page
Loading...
