Hitachi NAS Platform 4000 Series - Obtaining Backups, Diagnostics, Firmware Levels, and License Keys

Note: Replacement servers ar
e shipped without an embedded system
management unit (SMU), so you must have a SMU installed befor
e you can
connect to a standalone server.
Important: Set e
xpectations up fr
ont with the customer that this will delay
time to recovery, and that some aspects of the systems conguration might
never be recovered.
Obtaining backups, diagnostics, firmware levels, and license keys
On the old server:
Pr
ocedur
e
1. If the server is online, using NAS Manager, navigate to Home > Server Settings >
Conguration Backup & Restore, click backup, and then select a location to save
the backup le.
Ensure you save the backup le to a safe location o platform so that you can
access it after the storage system is oine.
The backup pr
ocess performed by the embedded SMU will automatically capture
both the SMU and server conguration les in one complete set.
2. Navigate to Home > Status & Monitoring > Diagnostics download to download
the diagnostic test results.
3. Navigate to Home > Server Settings > Firmware Package Management to verify
the existing server (SU) rmware release level.
Obtaining backups, diagnostics, rmware levels, and license keys
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 100