Hitachi NAS Platform 4000 Series - Finalizing and Verifying the Replacement Server Configuration

9. Click Y
es to proceed past the Security Alert, and log in as admin
(default password:
nasadmin).
10. Verify and, if necessary, convert the new server to the model prole required.
This step requir
es a separate process, training, and license keys. Contact Hitachi
Vantara Support Connect if the incorrect model arrives for replacement.
11. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
12. Navigate to Home > Server Settings > Conguration Backup & Restore, select the
backup le you want, and click restore to restore the system from that backup le.
13. Reboot the server.
14. Reconnect the data cables to the server.
15. To uninstall the embedded SMU
, log in as root and issue the command: smu-
uninstall
16. Navigate to Home > Server Settings > License Keys to load the license keys.
17. Remove the previous license keys and add the new keys.
Finalizing and verifying the replacement server configuration
The Fibre Channel (FC) link speed varies according to the server model. Use the
appropriate speed for your model.
Model Fibre Channel link speed
HNAS 4040 4 Gbps
HNAS 4060, 4080, and 4100 8 Gbps
Finalizing and verifying the replacement server conguration
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 107