Hitachi NAS Platform 4000 Series - Collecting System Backups and Diagnostics

4. Insert the pr
e-assembled r
eplacement module straight into the chassis, and gently
but rmly push the pack into position.
The battery pack is automatically connected.
5. Tighten the thumbscrew by turning it clockwise.
6. Replace the server bezel.
7. Dispose of the old battery pack in accordance with environmental regulations or
return to the supplier.
Collecting system backups and diagnostics
After replacing the battery, collect system backups and diagnostics.
Procedure
1. Connect to the back-end NAS Private Management Switch.
2. Open a browser session to the SMU. (External: 192.0.2.1; Embedded: 192.0.2.2).
3. Login as Username: admin Password: nasadmin
4. Back up the Server registry (Embedded SMU - this will include the SMU
conguration).
a. Navigate to Home > Server Settings > Conguration Backup and Restore.
b. Click
Backup.
c. Save the registry le to a location on your computer.
d. Verify that the archive le can be opened and the contents can be extracted.
5. Backup the SMU Conguration - External SMU ONLY.
a. In the GUI, navigate to SMU Administration > SMU Backup and Restore
b. Click Backup SMU: Backup.
c. Save the conguration le to a location on your computer.
d. Verify that the archive le can be opened and the contents can be extracted.
6. Collect Diagnostics from the cluster.
a. Navigate to Home > Status and Monitoring > Download Diagnostics
b. Check only the check boxes and radio button shown below .
c. Click download
.
Collecting system backups and diagnostics
Chapter 5: Replacing server components
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 71