Hitachi NAS Platform 4000 Series - Server Specifications

All server models have a chassis that is 3U (5.25 inches) high, 480 millimeters (19 inches)
wide, r
ack mountable, and a maximum of 686 millimeters (27 inches) deep, ex
cluding the
bezel. The chassis contains:
■
Front bezel
■
MMB (Main Motherboard)
■
MFB (Main FPGA Board)
●
Model 4040 uses an MFB
●
Models 4060 and 4080 use an MFB2
●
Model 4100 uses an MFB2E
■
Hot-swappable fan assemblies
●
Model 4040 has two fans
●
Models 4060, 4080, and 4100 have dual fans
■
Dual power supplies
■
NVRAM backup battery pack
■
Dual 2.5 inch disk drives
If there is an issue with the motherboard (MMB) or eld programmable gate array (MFB),
the server must be returned for repair. MMBs are not eld replaceable and, typically,
MFBs are not eld replaceable). Many of the other components can be replaced in the
eld, and some are hot-swappable (they can be changed without shutting down the
server). Field replaceable units (FRUs) include power supplies, an NVRAM backup battery
pack, fan assemblies, and disk drives.
Server specifications
The following specications are for the server. Except for the power and cooling values,
these specications do not reect dierences among models; they are the maximum for
all server models. For more detailed specications of a particular model or conguration,
contact your representative.
Physical:
■
Weight: 25 kg (55 lb.) with plastic bezel or 26 kg (57 lb.) with metal bezel
■
Height: 132 mm. (5 in.)
■
Depth (including handles and bezel): 725 mm. (28.6 in.)
■
Width: 440 mm. (17.3 in.)
■
Rack space required: 3U (5.25 in.)
Note: A r
ack unit, or U, is a unit of measure that is used to describe the
height of equipment intended to be mounted in a r
ack. One rack unit is
equivalent to 1.75 inches or 44.45 millimeters.
Server specications
Chapter 4: Hitachi NAS Platform server components
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 29