Hitachi NAS Platform 4000 Series - Finalizing and Verifying the Replacement Server Configuration

This step requires a separate process, training, and license keys. Contact Hitachi
V
antar
a if the incorrect model arrives for replacement.
11. Navigate to Home > SMU Administration > Upgrade SMU to verify and, if
necessary, upgrade the embedded SMU to the latest SMU release.
12. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
13. Navigate to Home > Server Settings > Conguration Backup & Restore, select the
desired backup le, and click restore to restore the system from that backup le.
14. Reboot the server.
15. Reconnect the data cables to the server.
Finalizing and verifying the replacement server configuration
The Fibr
e Channel (FC) link speed varies according to the server model. Use the
appropriate speed for your model.
Model Fibre Channel link speed
HNAS 4040 4 Gbps
HNAS 4060, 4080, and 4100 8 Gbps
On the replacement server:
Note: The following steps show the FC link speed as 8 Gbps as an example.
Finalizing and verifying the replacement server conguration
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 97