Hitachi NAS Platform 4000 Series - Page 113

■ If the server is oper
ating normally
, and is not displaying any alarm conditions,
run a backup to capture the revised conguration, and then download another
diagnostic to support. Permanent license keys for the new server will be
provided within 15 days.
■ If the server is not operating normally for any reason, contact support for
assistance.
2. Navigate to Home > Server Settings > Cluster Conguration to verify the cluster
conguration status. Ensure that the cluster is shown as Online and Robust and has
the correct number of nodes.
3. Use CLI to verify that the new node has access to the System Drives. Use sd-list
fr
om the node that you have just replaced.
Finalizing and verifying the server conguration
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 113