Hitachi NAS Platform 4000 Series - Page 118

If the LED is ashing or xed, press and hold the r
eset
button for ve seconds or
until the LED starts ashing. The battery disables when you release the reset
button.
4. Use the following rear panel gure and table to identify and label the cabling
placement on the existing server.
Figure 41 Rear view of server - HNAS 4040 model
Item Labels Ports Connections
1 1 10 GbE data network
2 10 GbE data network
2 1 Gigabit Ethernet network port
2 Gigabit Ethernet network port
3 Gigabit Ethernet network port
4 Gigabit Ethernet network port
5 Gigabit Ethernet network port
6 Gigabit Ethernet network port
3 1 10/100 Private management network
Ethernet port
2 10/100 Private management network
Ethernet port
3 10/100 Private management network
Ethernet port
4 10/100 Private management network
Ethernet port
5 10/100 Private management network
Ethernet port
Shutting down the servers you are replacing
Appendix A: Server replacement procedures
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 118