Hitachi NAS Platform 4000 Series - Page 49

Item Connectivity Quantity Description
1 Clustering ports 10 GbE
(SFP+)
2 For cluster management and
heartbeat, connect to:
■
T
wo way
conguration: Connect to
corresponding cluster server ports
(top port to top port and bottom
port to bottom port).
■
N-way conguration: Connect to 10
GbE switch.
2 10 GbE network ports
(SFP+)
4 Connection to external Ethernet data
network .
3 8 G FC storage ports
(SFP+)
4 Connection to disk arrays or (where
present) to the FC switches.
4 n/a Status LEDs (NVRAM, power, and
server), and Power and Reset buttons.
5 and
6
n/a 2 Plastic handles.
Caution: Do not lift the
server b
y these handles.
7
n/a 2 Holes for mounting the power supply
cable retention clasps.
8 Power supply units:
PSU 1
PSU 2
2 Connect to the rack's Fault group:
■
PSU 1 to Fault group A
■
PSU 2 to Fault group B
9 I/O ports Keyboard (purple) and mouse (green)
ports. (Reserved for Customer Service
Engineer access only.)
10 I/O ports 2 USB port. (Reserved for Customer
Service Engineer access only.)
11 IPMI port 1 Can be used for Remote Management.
For further information, visit Hitachi
Support Connect.
12 RS-232 1 Management interface. (Reserved for
Customer Service Engineer access only.)
13 Video port 1 Video management interface port.
(Reserved for Customer Service Engineer
access only.)
Server rear panel - models 4060, 4080, and 4100
Chapter 4: Hitachi NAS Platform server components
Hitachi NAS Platform and Hitachi Unied Storage Series 4000 Hardware Reference 49