Hitachi P-AP56NAM - Transportation and Handling; Before Installation

5 TRANSPORTATION AND HANDLING
1 Transport the air panel without unpacking as close to the
installation location.
2 Mount the air panel as soon as possible after unpacking.
3 When the air panel is placed on the oor after unpacking,
place it with the rear side downward (the surface to t the
indoor unit body) on an insulation material, etc. However,
do not leave the air panel on the oor for long time. It may
cause air leakage due to scratch the seal packing.
In addition, if the air panel is placed with the surface
downward, the louver mechanism may be damaged due to
touch the louver to the oor, etc.
4 Do not move the louver by hand. If moved, the louver
mechanism will be damaged.
6 BEFORE INSTALLATION
1 Check to ensure that the following accessories are packed with the air panel.
Name
Quantity
Remarks
P-AP56NAM P-AP56NAMS P-AP56NAMR
Long Screw (M5 Cross Screw)
4 4 - For xing air panel
Receiver Kit PC-ALHC1
CoolHeat
Emergency
RunDefFilterTimer
- - 1 With connecting cable
Plastic band
- - 1 For xing wiring cover and connecting cable
Installation Manual and Operation Manual 1 1 1 -
If any of these accessories are not packed in the packing, please contact your contractor.
TRANSPORTATION AND HANDLING
PMML0570 rev.0 - 01/2021
3
EN