Hitachi PH - Page 131

4-8 ● Setting the Date and Time
Press Hour input field.
The cursor moves to the "hour" input field.
5
Press 2 and 3 in sequence.
The display reads [23] (hour) [45] (minute) [12] (second), with the cursor
positioned in the "minute" input field.
6
Press 0 and 0 in sequence.
The display reads [23] (hour) [00] (minute) [12] (second), with the cursor
positioned in the "second" input field.
7
Press 0 and 0 in sequence.
The calendar time is set as indicated below, with the cursor positioned in the
"year" input field.
[2011] (year) [07] (month) [07] (day)
[23] (hour) [00] (minute) [00] (second).
8
Press OK .
You are returned to the "Environment setup menu" screen.
9
Cursor will move to the
line you touched.
Press 2 .
The calendar time control field then reads "clock stop" to permit calendar time
input.
4
Calendar time control [ 2 ] (1:same as current time 2: )
Calendar time [ 2 0 1 5 ](year) [ 0 7 ](month) [ 0 7 ](day)
[ 1 2 ](hour) [ 4 5 ](minute) [ 0 0 ](second)
Clock stop
Cancel
←
→