Hitachi PH - Count Conditions Transmission

6-14 ● Standard Communication Functions
Assume that the printer is ready for printing.
1
6.3.10 Count Conditions Transmission
● The following shows an example of changing the range of count from "0000 to 9999"
to "AAAA to FFFF":
Press Count Conditions button in the "Edit message" screen.
2
The range of count "0000 to 9999" has already been entered.
3
Transmit "Range 1", "Range 2" and "Initial value" from
external device to the IJ printer ..
5
Shows text data between STX and ETX
Transmission data
ESCHeader4TypeAAAA
Transmission code
1BH 80H 34H 31H 41H 41H 41H 41H
Item No.
Range 1
ESC Header 4 Type F F F F
Range 2
ESCHeader4TypeAAAA
Initial Value
1BH 80H 34H 32H 46H 46H 46H 46H
1BH 80H 34H 30H 41H 41H 41H 41H
* With the above transmission code, the setting on the number of transfer bytes
will be described in the 2-byte mode.
Shut
down
Manual
Back
←
→
Prev.
item
Next
item
Blank
123456789
[ 0 0 0 ]
Range [ 0 0 0 0 ]
[ 9 9 9 9 ]
Jump from: [ ]
to: [ ]
0
Count conditions Status: Ready
Prev.
dis-
paly
Next
dis-
paly
User
pat-
tern
ABC
.
123
Sign
.
0
Incre-
ment
Decre-
ment
. . . .
. . . .
Value
Press the Manual key then press Online/Offline key.
The status then changes from "off-line (Com=0)" to "on-line (Com=1)".
4
Show
cursor