● Operating Scheme 2-13
2.3.2 Status
(1) The printer is in one of the following states.
No. State Description
1 Stop The ink is stopped. No deflection voltage is applied.
2 Standby The ink is ejected. No deflection voltage is applied.
3 Ready The ink is ejected. The deflection voltage is applied (printing
is permitted by the sensor signal).
4 Starting State in which the printer changes from the inactive state to
the standby state.
5 Ink heating Start up in process, with the ink being heated.
6 Drop adjust Period during which ink particles are not properly charged in
the standby state.
7 Cover open Period during which the nozzle head cover is open in the
standby state.
8 Service Circulation control process for maintenance task execution.
9 Fault State in which a fault exists.
(2) The current status including the on-line/off-line (communication) state
is constantly displayed at the top of the screen.
To Next Page
Loading...
