Hitachi PH - Setting the User Environment

● Setting the User Environment 4-3
Setup item Description Default
Repeat print
sensor mode
● Sets the conditions under which printing is
performed a preselected number of times at
predefined intervals.
● Invalid if the repeat count is 0.
Signal ON
period
Reverse
direction
printing
● Set whether reverse direction printing is to be
performed or not.
When character orientation is normal (0, 1):
When character orientation in the print
specifications screen is inverted (2, 3), print
direction (forward, reverse) will also be inverted
by the above specifications.
Disable
4.2 Setting the User Environment
(1) Overview
Signal ON
period
While the print target detection
signal is ON
OFF - ON
transition
When the print target detection
signal turns ON
OFF=ABC
Prints in forward direction when
the reverse direction printing signal
is OFF; and in reverse when it is
ON.
OFF=CBA
Prints in reverse direction when the
reverse direction printing signal is
OFF; and forward when it is ON.
When OFF When ON
123
123
Reverse direction
printing signal
(The arrow shows
the order of printing)
OFF ON
Print target
detector signal
ON
ON
When OFF When ON
123
123
Reverse direction
printing signal
(The arrow shows
the order of printing)
OFF
ON
Print target
detector signal
ON ON
OFF=ABC
OFF=CBA