Hitachi PH - Confirming the Warning Condition and Fault Occurrences

● Confirming the Warning Condition and Fault Occurrences 8-9
8.3 Confirming the Warning Condition and
Fault Occurrences
(1) Overview
● You can confirm the time and descriptions of warning condition/fault message
generations.
● Up to 90 warning condition/fault message generations can be displayed.
● If the number of message generations exceeds 90, the oldest message is erased.
(2) Operating procedure
While the Maintenance menu screen is displayed, press
View alarm history .
The following screen then opens to list warning condition/fault occurrences.
1
Press Back .
The system then returns you to the "Maintenance menu" screen.
2
● If there are sixteen or more occurrences, press Next list to view the hidden
listings. Pressing Previous list returns you to the initial screen.
● When Date/time is pressed, the date and time are displayed in ascending
order.
Shut
down
Manual
Back
Environment setup
menu
Maintenance menu Status: Standby Com=0
Operation
management
Test print
Excitation V update
(Nozzle test)
View alarm
history
Circulation control
View software
version
Comm. monitor
Password
protection
HOME
Shut
down
Manual
Back
Date/time
Next
list
Fault/warning log Status: Standby
Prev.
list
Name of alarm
01 2015/07/05 00:00 81 Ink Low WArning
02 2015/06/30 23:59 49 Print Overlap Fault
03 2015/05/10 12:40 82 Makeup Ink Low Warning
04 2015/05/10 12:34 50 Cover Open
05
06
07
Com=0
No.
When HOME is
pressed, the system
returns to the print
description screen.