Hitachi PH - Changing a Message Name

5-6 ● Managing Created Print Data
Verify that the printer is in "Stop," or "Standby" state.
Choose Auxiliary function from the menu.
The "Auxiliary function menu" screen then opens.
1
Press Manage messages .
The "Message management menu" screen then opens.
2
5.1.3 Changing a message name
(1) Overview
● You can change the message name of saved print data.
(2) Operating procedure
● Changing the message name of saved data from "AAAAAAAAAAAA" to
"ABC9701"
Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
Back
Manage messages
Aux. function menu Status: Stop
Create user
pattern
Calibrate touch
screen coordinates
Copy data Select Languages
Edit Standard
pattern
HOME
Com=0
Back
Change message
number
Message mgmt. menu Status: Stop
Delete Stored
message
Change message name
HOME
Com=0
Press Change message name .
The data selection screen for a Change message name then opens.
3
Select
No.
Change message name Status: Stop Com=0
Message name
1 7 GGGGGGGGGGG
2 BBBBBBBBBBB 8 HHHHHHHHHHH
3 CCCCCCCCCCC 9
4 DDDDDDDDDDD 10
5 EEEEEEEEEEE 11
6 FFFFFFFFFFF 12
Priv.
list
Next
list
Cancel
Select the message name to be changed.
No. Message name
1 AAAAAAAAAAA
● If there are 13 or more registrations, press Next list or Previous list as
needed to switch to a desired listing screen.
Menu
Maintenace
Auxiliary
function
Operation
management
Show fault
/Warning
Environment
setup menu
When HOME is
pressed, the system
returns to the print
description screen.
Start
up
Start
up
Start
up