● Recovery Filter Replacement 7-26
7.10 Recovery Filter Replacement
Pull out the makeup ink reservoir forward and out.
1
Rotate the nut of the recovery filter and pull it forward and
out.
2
Recovery filter
Makeup ink reservoir
Nut
If ink is accidentally spilt,
wipe it up promptly with
wiping paper or something
similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped
portion has completely dried.
CAUTION
Remove the O ring and filter with tweezers and mount new
ones.
3
O ring
Filter
O ring
Filter
Return it to its original state, and check to see that there is no
leak of the ink in operation.
* Tighten the nut securely by hand.
4
Pull out
To Next Page
Loading...
