Hitachi PH - If a Fault Occurs at the Beginning of an Operation

2-4 ● Startup
2.1.2 If a fault occurs at the beginning of an operation
Press the Manual key to display the control menu. Press the
No-cleaning stop and OK keys in sequence to stop the ink
ejection operation.
1
Remove the print head cover. This requires loosening its retaining
screw.
2
Loosen the screw.
Print head cover
P
u
l
l
o
u
t
.
No-cleaning stop : Stops ink ejection without cleaning.
Standby : Switches between the ready-for-printing state and standby state.
Manual Control Menu
Online/
Offline
No-cleaning
stop
Manual
Shut
down
Standby
Cancel
Press the Manual key.
Manual Control Menu
Press the No-cleaning stop key.
Press the OK key.
Shutdown Process Confirmation
Shutdown will stop the ink jet.
Solution To stop the ink jet, press [OK].
OK
Cancel
Com=0
Menu
《
》