Hitachi PH - Calendar Conditions Transmission

6-10 ● Standard Communication Functions
Assume that the printer is ready for printing.
1
6.3.6 Calendar Conditions Transmission
● The following shows an example of changing the offset of day from "0000" to
"0003":
Press the Calendar conditions in the "Edit message" screen.
2
The offset of day "0000" has already been entered.
3
Shut
down
Manual
Back
←
→
Prev.
item
Next
item
Subst.
rules
Decre-
ment
Incre-
ment
12 345 6 789
[ 0 0 0 ] [ 0 ] (0: 1:Enable) [ 0 ] (0: 1:Enable)
Month [ 0 0 0 0 ] [ 0 ] (0: 1:Enable) [ 0 ] (0: 1:Enable)
Day [ 0 0 0 0 ] [ 0 ] (0: 1:Enable) [ 0 ] (0: 1:Enable)
Hour [ 0 0 0 0 ] [ 0 ] (0: 1:Enable) [ 0 ] (0: 1Enable)
Min. [ 0 0 0 0 ] [ 0 ] (0: 1:Enable) [ 0 ] (0: 1:Enable)
Dis.
Dis.
Dis.
Dis.
Dis.
Dis.
Dis.
Dis.
Dis.
Dis.
0
Calendar conditions Status: Ready
< Offset > < Substitution rules > <Zero-suppression>
Substitution rules No[01]
Year
Transmit "day offset" from the external device to the IJ printer.
5
The offset of the day will change.
6
Shows text data between STX and ETX
Transmission data
DLE Header 2 Day 0 0 0 3
Transmission code
1BH 76H 32H 32H 30H 30H 30H 33H
Offset
Item No.
* The calendar conditions can be transmitted only for items in which the calendar
characters have been previously set. To transmit items without calendar characters,
transmit the calendar characters first.
Press the Manual key then press Online/Offline key.
The status then changes from "off-line (Com=0)" to "on-line (Com=1)".
4
Show
cursor