Hitachi PH - Page 155

5-16 ● Copying User Data on a Memory Card
Press Copy data .
The "Copy data" screen then opens.
3
Copy user pattern from a Memory card onto an IJ printer .
2
Verify that the printer is in "Stop"state.
Choose Auxiliary function from the menu.
2
The "Auxiliary function menu" screen then opens.
Back
Manage messages
Aux. function menu Status: Stop
Create user
pattern
Calibrate touch
screen coordinates
Copy data Select Languages
Edit Standard
pattern
HOME
Com=0
Start copy
Copy direction
Copy data Status: Stop Com=0
Mem. card →
Pinter
Select the copy direction and then press [Start copy].
Cancel
Printer →
Mem. card
When HOME is
pressed, the system
returns to the print
description screen.
Menu
Maintenace
Auxiliary
function
Operation
management
Show fault
/Warning
Environment
setup menu
Start
up
Insert a Memory card into a slot when power off state,
then power on.
1
Memory card (Compact Flash (CF);
2G bytes or less)
[Caution] Make the back of the Memory card face the board.
In inserting it into a slot, do not overstrain it.
Insert it into a slot along its rails, or it will be accidentally
inserted as the diagram above indicates.
Rails