● Long-term Shutdown 7-40
Table 1 Repairing the Printer after long-term shutdown
Symptom Repair
No makeup ink
comes out from
the nozzle.
Remove the tube connecting block from the makeup ink reservoir.
Execute the makeup ink refill step.
While this step is in progress, put the nozzle of the cleaning bottle
containing the makeup ink in the end of a pipe that is connected to
pipe "N" and press the body of the cleaning bottle to let the
makeup ink flow into the pipe.
If the makeup ink flow into the pipe "N", repairing is completed.
The ink cannot
be disposed of
or filled up.
Contact your nearest local distributor.
Upon completion of the second ink refilling sequence, the
"Circulation control" screen opens again.
5
The startup process to be performed after long-term shutdown is now completed.
Tube connecting block
Cleaning bottle
1
2
3
4
To Next Page
Loading...
