Hitachi PH - Page 257

8-4 ● On-screen Message Descriptions
No. Message Meaning of message Remedy
11
Deflection
Voltage Fault
The high-voltage power
supply output voltage is too
low or too high.
● Contact your nearest local
distributor.
12
DC Power Supply
Fan Fault
The power supply section is
faulty.
● Contact your nearest local
distributor.
13
Charge Voltage
Fault
The charge electrode is
shorted.
● Check that there is no
shortcircuit with another part.
14
Internal
Communication
Error S
Data processing within the
engine section is faulty.
● Turn the power OFF and then
back ON.
15
F memory
Fault M
The engine section hardware
is faulty.
● Contact your nearest local
distributor.
16
F memory
Fault 9
The engine section hardware
is faulty.
● Contact your nearest local
distributor.
17
F memory
Fault S
The engine section hardware
is faulty.
● Contact your nearest local
distributor.
18
F memory
Fault C
The controller section
hardware is faulty.
● Contact your nearest local
distributor.
19 Hardware Error C
The controller section
hardware is faulty.
● Contact your nearest local
distributor.
20
Ink Heating Too
High
The ink heating section is
faulty.
● Contact your nearest local
distributor.
21
Heating Unit
Sensor Fault
The ink heating section is
faulty.
● Contact your nearest local
distributor.
22
Ink Heating
Current Fault
An overcurrent flowed to
the heating unit.
● Contact your nearest local
distributor.
23
Ambient
Temperature
Sensor Fault
There is an open in the
ambient temperature sensing
element.
● Contact your nearest local
distributor.
24
Viscometer
Temperature
Sensor Fault
Fault in ink temperature
detected by viscometer
occured.
● Contact your nearest local
distributor.
25 Pump Motor Fault Pump motor is faulty.
● Contact your nearest local
distributor.
26 Cooling Fan Fault Cooling fan is defective.
● Contact your nearest local
distributor.