8-6 ● On-screen Message Descriptions
No. Message Meaning of message Remedy
12
Ink Drop Charge
Too High
The value of the signal that
detects the ink drop charge
is too high.
● Clean the gutter, deflection
electrode, and its
surroundings.
● Adjust the excitation V-ref. to
make sure that the ink drops
are well made.
● Adjust the ink pressure.
● Check that the ink stream is
correctly retracted.
13
Internal
Communication
Error C
Data processing within the
engine section is faulty.
● Turn the power OFF and then
back ON.
14
Internal
Communication
Error M
Data processing within the
engine section is faulty.
● Turn the power OFF and then
back ON.
15
External
Communication
Error NNN
The serial communications
port had a data error.
● Refer to page 6.1.
(Chapter.6 Communication)
● Note the error code and see
that no more errors occur.
16
External Signal
Error NNN
(Option)
An external signal does not
function properly.
● Refer to Option manual.
To Next Page
Loading...
