● Setting Print Format 3-10
[ 1] (0: none 1: 2:ITF 3:NW-7
4:EAN-13 5:DM 6:C128)
[ 4 ] (1 : 5x5 2 : 5x8 3 : 7x10
4 : 5 :18x24 6 : 24x32)
(3) Printing barcode
● After setting barcode using "Print format" screen, input contents to be printed.
● Character spacing has already been specified by the type of barcode:
It cannot be changed.
● Setting the line spacing to 0, character size to 12×16, character width increase to 1
and barcode to code 39.
● Set contents to be printed to "1234567890".
From the "Print description" screen, press Print format .
1
Press the setup item to be edited.
4
Change the value as desired with a numeric key, Decrement
key, or Increment key.
5
Press Apply .
6
Press Back twice.
You are then returned to the "Print description" screen.
7
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed by
touching.
Prev.
item
Print format
Manual
Status: Ready
Next
item
Prev.
dis-
play
Next
dis-
play
Back
[ ]
123 456 7890
Decre-
ment
Incre-
ment
12x16
4
Character size
Prev.
item
Print format
Manual
Status: Ready
Next
item
Prev.
dis-
play
Next
dis-
play
Back
[ ]
123 456 7890
Decre-
ment
Incre-
ment
C39
1
Bar code
Show
cursor
Shut
down
Show
cursor
Shut
down
Line spacing [ 0 ] (dots 0-2)
Inter-char. space [ 0 ] (dots 0-3)
Increased width [ 1 ] (times 1-9)
Print format
Shut
down
Manual
Status: Ready
Back
To Next Page
Loading...
