EasyManua.ls Logo

Hitachi PH - Page 99

Hitachi PH
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-31 Printing Characters
Table 1. Print example of count multiplication print (zero-suppression disabled)
Input characters [C C C C C C ]
Count multiplier [0 . 3 0 4 8 ]
Zero-suppression Disabled
Initial value Multiplication result Printed result Note
0 0 0 0 0 1 0. 3 0 4 8 0. 3 0 4 8 -
0 0 0 0 0 2 0 . 6 0 9 6 0 . 6 0 9 6 -
…… -
0 0 0 0 1 0 3. 0 4 8 0 3. 0 4 8 0 -
0 0 0 0 1 1 3 . 3 5 2 8 3 . 3 5 2 8 -
…… -
3 2 8 0 8 2 9 9 9 9 9 . 3 9 3 6 9 9 9 9 9
Digit which can not be printed
will be rounded off.
3 2 8 0 8 3 9 9 9 9 9 . 6 9 8 4 1 0 0 0 0 0
Digit which can not be printed
will be rounded off.
……
9 9 9 9 9 8 3 0 4 7 9 9 . 3 9 0 4 3 0 4 7 9 9
Digit which can not be printed
will be rounded off.
9 9 9 9 9 9 3 0 4 7 9 9 . 6 9 5 2 3 0 4 8 0 0
Digit which can not be printed
will be rounded off.
Print examples are shown in the tables below.
(Following is when Enable/Diasbled is set to zero suppression setting respecively.)
3
. . . .
. . . .
Table 2. Print example of count multiplier print (zero-suppression enabled)
Input characters [C C C C C C ]
Count multiplier [0 . 3 0 4 8 ]
Zero-suppression Enabled
Initial value Multiplication result Printed result Note
0 0 0 0 0 1 0. 3 0 4 8 0. 3 0 4 8 -
0 0 0 0 0 2 0 . 6 0 9 6 0 . 6 0 9 6 -
…… -
0 0 0 0 1 0 3. 0 4 8 0 3. 0 4 8 -
0 0 0 0 1 1 3 . 3 5 2 8 3 . 3 5 2 8 -
…… -
3 2 8 0 8 2 9 9 9 9 9 . 3 9 3 6 9 9 9 9 9
Digit which can not be printed
will be rounded off.
3 2 8 0 8 3 9 9 9 9 9 . 6 9 8 4 1 0 0 0 0 0
Digit which can not be printed
will be rounded off.
……
9 9 9 9 9 8 3 0 4 7 9 9 . 3 9 0 4 3 0 4 7 9 9
Digit which can not be printed
will be rounded off.
9 9 9 9 9 9 3 0 4 7 9 9 . 6 9 5 2 3 0 4 8 0 0
Digit which can not be printed
will be rounded off.
. . . .
. . . .
*) Count characters is referred to as C, space is referred to as in this sheet.
Count multiplier can be set to maximum of 2 print items.
To restore it to standard count print item, please input blank characters
to count multiplier to make it non-input status.
Count multiplier input field will be masked and not enterable if multiplier
is already set to 2 items on other print items.
Count multiplier input field will be masked and not enterable if barcode
was set to count multiplier.
Integer number can be input to count multiplier.
None of alphabets, symbols or user pattern can be input to count
multiplier.
Caution when using count multiplication print

Table of Contents

Related product manuals