HOLDEN VE UTE II 2012 Series - Page 159

Black plate (55,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Infotainment System 7-55
6. Touch the Bluetooth
®
device.
Pairing device... is displayed.
Enter code XXXX into device is
displayed.
7. Enter the displayed code into the
mobile phone to start pairing.
If pairing failed, Pairing failed is
displayed.
If pairing was successful,
Pairing completed is displayed.
8. Pairing is now completed.
AdduptofivedevicestotheLast
paired devices list.
Deleting a Bluetooth
®
device
1. Press CONFIG.
2. Touch the Bluetooth tab.
3. Touc h Paired devices.
A list of paired devices is
displayed.
4. Touc h Delete.
5. Touch the device to be deleted.
Delete the paired device
<Device Name> is displayed.
6. Touc h OK.
The device will be deleted from
the Last paired devices list.
Connecting another Bluetooth
®
device
Connect an extra Bluetooth
®
device
and disconnect the currently paired
device without deleting the device
from the Last paired devices list.
1. Switch on the extra Bl uetooth
®
device to be paired, and prepare
it for pairing.
2. Press CONFIG.
3. Touch the Bluetooth tab.
4. Touc h Paired devices.
The current connection is
marked with an asterisk on the
right hand side.
5. Touch the device to be paired on
the Last paired devices list.
The pop-up Connect <Device
Name> ? is displayed.
The currently connected device
will be disconnected.
6. Touc h OK.
Disconnecting device... is
displayed.
You may be asked to enter the
code into the mobile phone.
Connecting... is displayed.
Pairing of the new device is now
completed.
Auto-connecting a Bluetooth
®
device
1. Switch the Bluetooth
®
device on.