EasyManua.ls Logo

HOLDEN VE UTE II 2012 Series - Page 247

HOLDEN VE UTE II 2012 Series
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (43,1)
Holden VE Ute Owner Manual (MY12.5) - 2012 - CRC - 6/28/12
Vehicle Care 10-43
The tyre seala nt and air compressor
kit can be used to temporarily seal a
small puncture up to 6 mm in the
tread area of the tyre. It can also be
used to inflate an underinflated tyre.
Thevehiclemustbedrivenfor8km
after the tyre is sealed and i nflated
to the recommended pressure, to
ensure the sealant is distributed
evenly.
Take the vehicle to a Holden Dealer
to have the tyre repaired or replaced
as soon as possible.
A
B
C
F
G
E
D
The kit includes:
A. O n/off sw itch
B. Tyre sealant canister
C. Sealant-air delivery hose
D. Air-only delivery hose
E. Pressure gauge
F. 12 volt power connection
G. Air compressor
Tyre sealant
The sealant cannot seal sidewall
damage, large punctures, or a tyre
that has unseated from the wheel.
Follow the safety instructions on the
tyre sealant canister.
Check the expiry date on the tyre
sealant canister before use. The
tyre sealant canister must be
replaced before its expiry date.
There is only enough sealant to seal
one tyre.
After usage, the tyre sealant
canister and sealant-air delivery
hose must be replaced as an
assembly.
Replacement tyre sealant canisters
are available from a Holden Dealer.
Temporary puncture repair
A
C
F
1. Passengers m ust exit the
vehicle.
2. Inspect the damaged tyre.
Do not remove any objects that
have penetrated the tyre.

Table of Contents

Related product manuals