25
Size
Overall Gauge sizes can be adjusted by increasing or decreasing their pixel size. The minimum and maximum
values are displayed near the top of the number keypad. In this case, the min is 20 and the max is 780.
Value Display
When Value Display is enabled, a digital meter will appear inside an analog gauge showing real time values in
addition to the needle indicator.
Updates per Second
This changes the speed at which values are refreshed on the dash and can be changed from 1/sec to 10/sec
or full rate. These should be adjusted upon user preference.
Border
Borders around certain gauge types can be enabled or disabled by toggling this selection.
To Next Page
Loading...
