Hologic Faxitron Path - Faxitron Path System Setup

FAXITRON PATH USER MANUAL | HOLOGIC | REVISION 024
S
ECTION
Installation
a
nd Setup
2
2-4
Inspecting the Crates
The Faxitron Path System arrives in one large wood crate and one box. Have the shipping
agent transport the crate and box to an area where they can be kept safe from theft, damage,
or environmental extremes until the Hologic authorized representative can install the system.
Check crate and box for any damage. If either appears to be damaged, contact Hologic at 1-
800-447-1856.
The crate is about four feet tall. This crate contains the specimen unit, computer and system
manuals. The box contains the system monitor.
Lifting and Transporting the Crate
Caution: The crate weighs approximately 550 pounds (250 kg). The packaged system should
be kept upright as indicated on the shipping crate.
Unpacking and Assembling the System
The Faxitron Path system should be unpacked and setup by a Hologic Inc. authorized
representative.
Location
The Faxitrion Path system has ventilation and the power entry connector at the rear of the
cabinet. Leave at least 6” (15cm) of clear space behind the unit when installed to allow
adequate air flow and give the user access to disconnect the power cord.
2.2.0
Faxitron Path
System Setup