28
Honeywell 35 Series IP Cameras User Guide
DHCP: Select this option to obtain an available dynamic IP address assigned by the
DHCP server each time the camera is connected to the LAN.
Fixed IP: Select this option to manually assign a static IP address to the camera.
IP address:
You can make use of Unified Tool in the software CD to easily set up the camera on LAN.
See Accessing the Camera on page 4.
Enter the Static IP, Subnet mask, Default gateway, and Primary DNS provided by your
ISP or network administrator.
Subnet mask: This is used to determine if the destination is in the same subnet. The
default value is “255.255.255.0”.
Default gateway: This is the gateway used to forward frames to destinations in a
different subnet. Invalid router setting will disable the transmission to destinations
across different subnets.
Preferred DNS Server: The primary domain name server that translates hostnames into
IP addresses.
Alternate DNS Server: Secondary domain name server that backups the Primary DNS.
MTU (1280~1500): Set the maximum value of network transmission data packets.
Configuring Streaming Protocols
Go to Setup > Network Setup > Streaming Protocols.
Figure 23 Streaming Protocols-HTTP
To utilize HTTP authentication, make sure that you have set a password for the camera
first. For more information, see Configuring User Accounts Settings on page 56.
To Next Page
Loading...
Need help?
General
