41
Honeywell 35 Series IP Cameras User Guide
5. Select the Output channel.
6. Check the check boxes to enable Alarm record and SMTP.
7. Click SAVE.
Multi Loitering
The Loitering detection can be used for a detection object or a group of detection
objects lingering in an area for longer than a preset time threshold.
The applicable scenarios of this feature can be:
• Detects when a person is loitering at a walk-up of ATM lane.
• Detects when a person is loitering in a high-theft area of a store, or to prevent
vandalism and break-ins.
• Detects when a person is loitering in an area that is normally not an access for
visitors.
1. Go to Setup > Video Analytics > Multi Loitering.
Figure 32 Multi Loitering
2. Check the Enable checkbox to enable multi loitering detection.
3. Check the checkbox of Define Max people in the area.
4. Configure Max number of people in the area.
5. Configure Max allowed time in the area (s).
6. Configure the detection area.
• Press and hold the left mouse button, and drag in the video area to draw a
detection area
To Next Page
Loading...
Need help?
General
