52
Honeywell 35 Series IP Cameras User Guide
9 CONFIGURE SYSTEM SETTINGS
Configuring System General Settings
Go to Setup > System Setup > General Settings.
This section explains how to configure the basic settings for the camera, such as the
host name and system time.
Figure 37 System General Settings
Camera Name: Enter a name for the camera. The text will be displayed at the top of the
main page.
Time zone: Select the appropriate time zone from the dropdown list. If you want to
upload Daylight Savings Time rules, see Configuring Maintenance Settings on page 53.
Daylight savings time: Check the checkbox to enable Daylight savings time and specify
the DST start time and end time.
To Next Page
Loading...
Need help?
General
